Used Conveyor Control Panels

Used conveyor control panels are for controlling speed, plc controls, alarm systems, and much more. ASI’s used conveyor control panels designed for conveyor systems may contain plc controls, mag starters, and soft alarms to name a few. Each used conveyor enclosure acquired by ASI has gone through a full quality inspection, and guaranteed to be in good working condition.

Used Conveyor Control Panels
Used Conveyor Control Panels
  • Control, arms, speed and more
  • Automate Process of Conveyor
  • Good, Working Condition

Available Combo Deals

A programmable logic controller, PLC, or programmable controller is a digital computer used for automation of typically industrial electromechanicalprocesses, such as control of machinery on factory assembly lines, amusement rides, or light fixtures. PLCs are used in many machines, in many industries. PLCs are designed for multiple arrangements of digital and analog inputs and outputs, extended temperature ranges, immunity to electrical noise, and resistance to vibration and impact. Programs to control machine operation are typically stored in battery-backed-up or non-volatile memory. A PLC is an example of a "hard"real-time system since output results must be produced in response to input conditions within a limited time, otherwise unintended operation will result.

Before the PLC, control, sequencing, and safety interlock logic for manufacturing automobiles was mainly composed of relays, cam timers, drum sequencers, and dedicated closed-loop controllers. Since these could number in the hundreds or even thousands, the process for updating such facilities for the yearly modelchange-over was very time consuming and expensive, as electricians needed to individually rewire the relays to change their operational characteristics.

Digital computers, being general-purpose programmable devices, were soon applied to control of industrial processes. Early computers required specialist programmers, and stringent operating environmental control for temperature, cleanliness, and power quality. Using a general-purpose computer for process control required protecting the computer from the plant floor conditions. An industrial control computer would have several attributes: it would tolerate the shop-floor environment, it would support discrete (bit-form) input and output in an easily extensible manner, it would not require years of training to use, and it would permit its operation to be monitored. The response time of any computer system must be fast enough to be useful for control; the required speed varying according to the nature of the process. Since many industrial processes have timescales easily addressed by millisecond response times, modern (fast, small, reliable) electronics greatly facilitate building reliable controllers, especially because performance can be traded off for reliability.