Used Shelving

During the process of planning your used shelving application(s) a layout should be drafted to ensure that all elements of the used storage system are considered such as loading requirements, vehicles to be used, and location and capacities are considered.

 

Shelf selection is considered relative to the weight of products to be stored and loading method to be used.

 

Used Shelving posts must be selected to ensure that the shelf spacing is adequate for type and quantity of inventory.  

 

Used Bracing to prevent swaying and lateral movement must be designed into the system and included in the assembly instructions.

 

Uneven floors must be considered to prevent installed shelving load problems. Shims must be used to correct the level of the system.

 

Collision protection is an important consideration. ASI can provide all necessary floor guards to prevent vehicles from damaging the system.

 

The type of used shelving is important and is related to the use of the shelving and the location and environmental conditions. Consider the following:

 

Used Industrial Shelving is heavy duty shelving that can handle high capacities and hold up under heavy usage.

 

Used Galvanized Shelving is perfect for storage of parts outside or in freezers.

 

Used Wire Shelving is excellent for applications requiring cleanliness and to meet food storage standards.

 

Used Tool Room Shelving must take into consideration a wide range of uses from very small to large and heavy.

 

Used Rivet Shelving although for light duty usage and easy to install can be incorporated into a mixed system of light and heavy duty applications that will allow a customer to stay on budget. Double rivet used shelving is available for heavier duty requirements.

 

Used Commercial Shelving for offices is available in several variations and styles.

 

Used Bulk Shelving is available in several styles for light duty to heavy duty applications. Consider the following components that can be used to meet your most difficult specifications.

 

Posts/Uprights are vertical angles or tubes that allow the used shelving supports to clip-on. Several different styles are available from various shelving manufacturers.

 

Used Shelf Supports are designed to provide the support for the type of decking to be used in the system. Supports vary in type and quantity per level.

 

Used Shelves or Decking is chosen based on usage. Wire, steel or particle board is used depending on customer preference and usage. Customers can provide there own decking to suit their needs.

 

Refer to Shelving Guide.